We finish the styling.
Good day. This part is final in the question of laying linoleum on a prepared surface. I think we will immediately start the presentation of the necessary material.
Firstly, if you plan to cover the room prepared for the repair of the floor with more than one canvas, but divided into two or more parts, it is important to consider between them the coincidence of the picture.
Secondly, the preparation of bought linoleum is a process that takes a certain amount of time and requires the fulfillment of some conditions. So, the canvas must be spread out in the room and let it get out for two days at a temperature strictly not lower than 18 degrees. If linoleum is twisted in some places, you need to press it and align it. You should constantly adhere to the necessary temperature, since you will greatly simplify your task if the linoleum is even.
Types of styling.
To date, three types are distinguished: when using glue, without the use of glue, using cold mastic. We cannot force you to choose one of these options for ethical reasons, but to characterize everyone and advise something-with joy. In a living room where there are rarely many people, it is best to use glue for linoleum or bilateral tape. So, your cash losses will be minimal, and the required work will not be difficult. Remember that linoleum should not come into contact with the wall at a distance of 0.5 to 1 centimeter.
Of course, the best way to lay the canvas involves the use of glue. By the way, the technology is quite simple: you must bend one side exactly half and smear glue on it with a spatula. After it was a little in the air, we lay the canvas on the floor, squeezing the air with a special ironer (if it is not at hand, you can use a large stick, though then everything should be done very carefully, to avoid air bubbles).
If you decide to make linoleum styling without the use of glue and other adhesive substances, the technology here is much more complicated and risky. The whole canvas must be glued with tape and accurately fixed to the base. It is better to carry out such work with someone, since the slightest deviation of linoleum from the surface will lead to irregularities, which will continue to cause many problems.
Most importantly, it doesn’t matter what method you resorted to, be sure to install the plinth. Now with a calm soul, consider that all the work is done.