A fairly large amount of time is devoted to the issue of roof insulation for residential premises, but it is worth saying that industrial buildings in the same way need properly and timely care for the roof, especially in winter. Nobody wants to find with the onset of spring that the roof, only by your, so to speak, indiscretion, “has come out of the working system”.Because more and more often they make flat roofs for the industrial shooting range, we will talk about insulation of these types of roof. It does not matter, your building is heated, it does not heat, you need to insulate the entire roof. This is only connected with the fact that as soon as the temperature changes sharply, after the air, a little heated, begins to contact directly with the roof, which is at that time under the influence of negative temperatures, condensation is formed. Prevention of condensation and its timely conclusion is a guarantee that the roof will be operated for a long time.
In order to correctly perform insulation of such a roof, you need to, initially, pay special attention to the fact that such a roof is insulated exclusively by several layers, because there will be no result from one layer of insulation.
How to perform laying all layers, kaik should be laid layers and which can be omitted – everything only depends on what specific system your roof belongs. As an example, if we talk about the most traditional design, then the insulation is protected precisely thanks to the waterproofing carpet, and if the building is inverse on your building, then the insulation is protected by a special layer of thermal insulation.
What material should the insulation consist of? In this case, everything depends only on the class of the fire hazard of your building. The best insulation is stone cotton wool, because it fully complies with all the standards of insulation, and among them you need to highlight – fire safety, low thermal conductivity, vapor permeability, high density.