Repair of any room can not do without the use of the so -called ceiling plinth or stucco molding, plastic, etc. D. Using a ceiling plinth is the last stage of completion of the repair of the premises. Using a ceiling skirting board with easy, you can hide all the bumps or disadvantages that turned out during the repair.
So, it becomes clear that without a ceiling plinth, the repair of the room will look unfinished. Before you start using a ceiling skirting board, first of all, decide how much you need.
To do this, the room must be divided into two (the standard size of one ceiling baseboard two meters in a length of 45 mm in width, but there are also broader in size).
So, having decided on the size, quantity, you can proceed to the installation of the baseboard.
The ceiling plinth is attached in different versions:
– if the walls of the room are already covered with wallpaper, then in this case the baseboard will act as the final repair process, the skirting board to the ceiling is attached when using special construction adhesives or on top of the wallpaper using acrylic sealant;
– The second option is more time -consuming but more preferable, that is, after the walls and ceiling are leveled, stucco molding or ceiling skirting boards are attached using acrylic sealant or directly for putty.
Before starting the installation of the skirting board, the places of fasteners (on the walls and ceiling) must be moistened with a primer or simple water. Further, the installation of the skirting board must start with the angles of the ceiling of the room T. e. Having glued all the corners of the room, it is easiest for you to continue to glue straight sections.
The angles of the skirting board are easiest to cut using a special device called a stent (such a device is sold in any construction store), a knife for metal, a spatula, putty. Before you proceed to trim the ceiling baseboard, prepare a pre -cut template (it will be more convenient and easier). In order to trim the skirting board correctly, placed it in the stizl, while it is necessary to control the upper and lower edge, in general, we place it as it will be attached to the ceiling.
Of course without a bun, you can cut the skirting board and resorting to improvised means. Using cardboard or thick paper, we make a template that will repeat the external and internal angles of the wall.