When conducting many construction work, many materials are used: brick, cement, including a welded grid. It is produced in rolls or maps. For its manufacture, a galvanized steel wire performed by their ordinary steels is used.
The scope of this mesh is extremely wide, starting from the reinforcement of floors and walls to fences and flows of various designs. In the manufacture of cement screed, a welded grid is used, which can be made as a roll or card. The grid is fixed on reinforcing bars driven into the ground.
Fixation can be carried out either welding or using knitting wire. The same grid is used to reinforce walls before applying a layer of plaster. As an alternative, recently they began to use a grid performed by their polymeric materials. A mesh intended for reinforcement differs from a mesh for a fence of the size and shape of the cell.
Fences from such a grid build in several stages. At the first stage, markings are made, in accordance with the plan for placing the fence. By the way, even multi -experienced builders, sometimes make a mistake. They forget about the gate and gate. At the second stage, pits are prepared for the placement of supporting pillars. If the fence is planned to be built from a roll mesh, then the distance between the pillars can fluctuate within a few centimeters.
If the fence is planned to be built from the cards, then this parameter should be clearly withstanded. With normal ground, a hole is enough for this for this.7 meters. At the bottom, it is necessary to build a tamped pillow from an ASGS. Its thickness lies in the range from 15 to 20 centimeters. To obtain a pit, manual or mechanized Yamobur is often used. Such mechanization allows you to build a grid fence in a few business days.
To fill the fence, a grid with a powder coating applied to its surface is often used. The fastening of the grid to the supports can be performed by welding or using mechanical devices, which include clamping loops and screws for metal.