If you decide to start repairs in your home, then you will have to do quite a lot of work. But one of the main and important works is the repair of walls. For the most part, wall repair can be divided into five stages. And they are produced in a certain sequence. The exclusion of at least one stage will make the final repair of the walls impossible.
First you will need to study the building materials market and decide what exactly from the presented may be needed. To do this, try to visit as many different stores as possible and consider the whole range of materials presented. In the process of this, you will definitely imagine how your walls will look after repair. Then you will need to choose the materials you like and thoroughly study the method of their use. At this time, choose your favorite wall coating, decide on color and texture.
Immediately pick up the skirting boards, switches, sockets and other little things that may come in handy. Well, now you have to start the dirtiest stage of work – removing the old coating from the walls. It is completely necessary to clean the walls of old wallpaper or tiles, close all cracks. If the plaster is behind, then it also needs to be removed, and this place is reduced again. It is necessary to level the walls if there are at least small irregularities, otherwise these flaws will very much spoil the appearance of the new coating.
After this procedure, it is necessary to apply the necessary materials for preliminary preparation of the walls and process them with special compositions. This means that when leveling the walls, it will be necessary to apply layers of the material alternately and let each of them dry. When this procedure is completed, it is necessary to grind the walls, let it dry again and only then apply the finish plaster, which levens the walls and will be the basis for applying a decorative coating. After all this dries, you can proceed to the final stage of wall repair – final processing and decoration. Depending on the chosen type of final decoration of the walls, you will need to stick wallpaper or apply paint to the prepared coating. Now sockets, switches and additional lighting devices, such as sconces, will be installed. Also set the skirting board and if necessary – baguettes separating the ceiling from the walls. Now your housing has acquired a new look and has become very beautiful.